Here is a Carl Walter 12 volt test light. Carl Walter number 9785. It is made from brass with a protective cap. It has a sharp 10mm long tip. Good for old 6-24 volt car electrical systems, like found on old Volkswagen Beetle. Not for checking electronic components. DO NOT USE ON 110AC HOUSE WIRING. A high-quality item that is made in Germany. Call 615-735-3388 or visit http://www.samstagsales.c...
HAZET 794U-3 Piston Ring Compressor. Chrome plated. For rings 70-100mm.Overall length 332mm. For air-cooled and water cooled engines. The tightening band can easily be released. Push the handles apart and lift the band out of the notch. Mention The Samba for this price. https://www.samstagsales.com/hazet.htm#794u-3 _________________ Samstag Sales Fine German-Made Hand Tools www.SamstagSales.com...
VW244B Bearing Driver Press tool. Used to install the Syncro Hub and circlip for drive flange on 5 Speed gearbox 020 and 4 speed gear box 091. About 235mm long. Outside diameter 42mm, Inside diameter 32mm. Also for Type 1 rear axle shaft outer ball bearing, and oil seal for main drive shaft in transmission case. _________________ Samstag Sales Fine German-Made Hand Tools www.SamstagSales.com Ph...
HAZET 2582 Brake Adjustment Lever. Perfect for drum brakes on VW Cars. This item will ship Priority Mail for $9.99. To order please call 615-735-3388 or visit https://www.samstagsales.com/vwaudi.htm#2582 _________________ Samstag Sales Fine German-Made Hand Tools www.SamstagSales.com Phone/Fax: (615) 735-3388
Pilot Drift for Starter bushing installation. Also used to remove piston pin. Small end 11mm pin, 13.4mm collar. Big end 12.4mm pin 16.4mm collar. _________________ Samstag Sales Fine German-Made Hand Tools www.SamstagSales.com Phone/Fax: (615) 735-3388
Hazet 2515-1 Forcing screw used to separate the outer homocinetic joint of the axle drive shaft. M14x1.5 metric threads. 108mm long . 1/2" drive. *No longer available. Only 1 left _________________ Samstag Sales Fine German-Made Hand Tools www.SamstagSales.com Phone/Fax: (615) 735-3388
HAZET 2574 Valve Depressor VW-Audi 4 cylinder gas and diesel up to 1982 Golf. Similar to old VW factory tool VW546. This tool is no longer available from HAZET or Volkswagen. Samstag Sales is happy to be able to offer this hard to find old tool in very good used condition. This tool is interesting in that the handle is etched "V.W.546 Zel." Zelenda supplied tools to Volkswagen USA in the old da...
Here is a new Volkswagen VW401 plate. This is the official factory tool. Used for press operations on the gearbox and running gear. Made for the VW repair shop, but useful in any shop working on gearboxes. Please check your Bentley Publishers Service Manual for this tool number. THIS TOOL IS SPECIAL ORDER ONLY _________________ Samstag Sales Fine German-Made Hand Tools www.SamstagSales.com Phon...
Here is a FourM Brand 4M-051 Cone socket for grooved nut of pinion bearing on Type 2 air-cooled VW. Heavy Duty Steel Version. With 32mm hex drive. (MMMM) Brand from Europe. Similar to old Volkswagen factory tool VW381/14. This tool is no longer available from Volkswagen. Samstag Sales is happy to offer this hard to find tool. http://www.samstagsales.com/vwaudi2.htm#vw381_14 _________________ Sa...
Here is a new HAZET Club Lanyard. HAZET is a large tool company based in Germany with a complete line of fine quality hand tools. HAZET supplies tools for Mercedes, VW, Audi, BMW and Porsche. This is an item from the HAZET Club collection. This lanyard features a detachable plastic clip. Length 22" inches, width 15/16" inch. Keep your important items where you need them. http://www.samstagsales...
Elora Germany number 221-20.8 Spark Plug Socket 20.8mm - 13/16", old style with T-handle ball socket. 110mm long. With rubber insert to hold the plug. The T-handle is 120mm long ( 4-3/4" inches), and will rotate and store neatly inside the socket. This item will ship Priority Mail for $7.99. To order please call 615-735-338 or visit: http://www.samstagsales.com/elora.htm#221-20.8 ______________...
Esgen Mark-Line of Germany valve shim pliers. Chrome-plated. Similar to Matra 10-208 and old VW number US4476 Please mention The Samba for this price. _________________ Samstag Sales Fine German-Made Hand Tools www.SamstagSales.com Phone/Fax: (615) 735-3388
HAZET Germany 450N-17x19 Wrench, Double Open End 17mm x 19mm, type 450N, 220.9mm long. Quality Made in Germany. Visit: http://www.samstagsales.com/hazet.htm#450n-17x19 HAZET wrenches would make a great addition to your VW toolkit. _________________ Samstag Sales Fine German-Made Hand Tools www.SamstagSales.com Phone/Fax: (615) 735-3388
Universal dial gauge holder bracket, for valve guides, differential, and clutch work. It can be adjusted into multiple positions. For dial gauges with 8mm stem size. Around 5" tall. VW Factory Tool VW387. http://www.samstagsales.com/vwaudi2.htm#vw387 _________________ Samstag Sales Fine German-Made Hand Tools www.SamstagSales.com Phone/Fax: (615) 735-3388
Volkswagen VW381/15 Differential Socket Type 2 Bus Price: 99.99 Here is new socket similar to old Volkswagen factory tool number VW381/15 for old Air Cooled VW Type 2 Bus differential. Used to remove the drive flange adjusting ring. Similar to the Volkswagen factory tool. Made in Europe by (MMMM) brand. Part number 4M-053. This one is made with extra heavy duty steel and chrome plated. With 24 ...
Condition: New UPC: NA Volkswagen Here is a new Matra plastic wedge for Volkswagen. It is made by Matra in Germany. This is the official factory tool. This is Matra number 3409. It is made to remove trim moldings without damage to the car finish. It is about 130mm (5-1/8") long. Also, good for other cars with pop on trim. For questions about this item call (615) 735-3388 . We combine items to s...
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Restocking Fee: No Returns Accepted: Returns Accepted Return policy details: Here is a brand new set of STAHLWILLE 1/2" drive 12 point Metric Shallow Sockets. STAHLWILLE is a large company based in Germany with a complete line of fine quality hand tools. This is the model 50 socket a...
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Restocking Fee: No Returns Accepted: Returns Accepted Return policy details: Here is a new Stahlwille Metric feeler gauge. STAHLWILLE is a large company based in Germany with a complete line of quality hand tools. This is the model 11095/20 tool with 20 different flat blades. You get...
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Returns Accepted: Returns Accepted Return policy details: Restocking Fee: No Here is a new Stahlwille 3/8" drive flex head ratchet. STAHLWILLE is a large company based in Germany , with a complete line of fine quality hand tools. This ratchet has been called a knuckle saver because t...
Returns Accepted: Returns Accepted Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Return policy details: Restocking Fee: No Here is a new Stahlwille Metric Hex Key set. STAHLWILLE is a large company based in Germany with a complete line of quality hand tools. This is the Stahlwille model 10765/9 set. It is a 9 key metric set with...